How long does it take to build a deck?

Many take one to three weeks of working time, with permit review and weather adding to the calendar. Larger or covered structures take longer.

Usually, especially for attached or elevated decks. We handle the paperwork where we can and tell you what to expect.

Pressure-treated is lower cost upfront but needs regular staining. Composite costs more and needs less upkeep. We lay out the tradeoffs for your situation.

When can I stain a new pressure-treated deck?

Usually after it has dried out, which can take several weeks to a few months depending on weather. Staining too soon traps moisture.

Will the work tear up my yard?

Some. Digging and material delivery leave marks. We protect what we can and leave the area tidy.

Deck & Porch Building in Kennesaw, GA

Kennesaw sits about 28 minutes north of the shop, the first market up the Cobb Parkway corridor past the usual west-metro run. It spent most of its history as a small railroad town and then filled in fast — the population roughly tripled between 1990 and 2010 as wooded subdivisions went up off Cobb Parkway and around Kennesaw State. That history is why the work here is weighted toward painting: acres of 1980s-through-2000s builder stock all reaching their repaint years on the same clock, rather than the old-substrate remodeling that drives the older Cobb towns.

Get a free estimate (470) 419-0922

Cobb County · about 28 minutes from our Powder Springs shop

Deck & Porch Building for Kennesaw homes

The stock is overwhelmingly suburban and built in one long wave — 1980s through early-2000s subdivisions off Cobb Parkway and Stilesboro Road, with Legacy Park and Summerbrooke typical of the mid-to-late-90s build-out. That means builder-grade exteriors aging on one schedule: hardboard and Masonite lap siding swelling and delaminating at the butt joints and bottom courses in Georgia humidity, early fiber-cement that needs real prep and re-caulking, brick fronts with sided gables and rear walls, and the synthetic-stucco and stone-veneer accents on the golf-community homes, which have to be checked for moisture before anything goes over them. These are repaint jobs on a cycle — chalked coatings, failed caulk lines and south-and-west sun damage — and the pressure-treated pine decks that came with the houses are due to be stripped and restained. Inside, the two-story foyers and open great rooms of this era read as high-wall and stairwell work, and the older subdivisions still have popcorn ceilings to pull. The exception is a small, genuinely old core around the downtown depot — wood-frame houses from the late 1800s into the 1920s, weatherboard and wood sash — that needs carpentry and prep before a topcoat, plus scattered 1960s-70s brick ranches near Pinetree with trim, soffit and eave repair of their own.

Areas we work in Kennesaw

Downtown Kennesaw
Legacy Park
Pinetree Country Club
Summerbrooke
East Park Village

Near Southern Museum of Civil War and Locomotive History, Depot Park, Swift-Cantrell Park and across the rest of Kennesaw.

5.0 from 44 Google reviews. Dan James walks every finished job.

(470) 419-0922

What the job actually involves

A deck is a structure first and a finish second. Footings, ledger attachment and framing decide whether it is safe in twenty years, and Georgia clay, rain and termites make those details matter.

We use ground-contact pressure-treated lumber for structure, hot-dipped galvanized or stainless fasteners and connectors, and flashing at the house, because rot and rust at the connections are what end most decks early.

How we run a deck & porch building job in Kennesaw

1

Design, permits and layout

We agree on size, height, stairs and railing, then pull a permit where required. Footing locations are laid out and utilities are located before digging.
2

Set footings and posts

Holes are dug to the required depth and diameter for the local soil and frost depth, and concrete footings are poured. Georgia clay holds water, so drainage and footing size matter. Posts are set on proper connectors, not buried in dirt.
3

Attach the ledger and frame

If the deck attaches to the house, the ledger is flashed and bolted through the rim joist, not nailed. Beams and joists are framed with metal hangers and the right fasteners, with proper spacing.
4

Inspect framing

Where the jurisdiction requires it, an inspector looks at footings and framing before decking covers them.
5

Decking, stairs and railing

Decking goes down with correct gaps for drainage and expansion. Stairs are built with consistent risers, and railings are fastened to meet code height and strength.
6

Finish and cleanup

Pressure-treated wood needs time to dry before staining, which can be weeks, so we advise you on timing. Composite needs no stain. We clean the site and haul away scraps.

What moves the price

We will not quote Kennesaw blind over the phone — these are the things we look at on site that decide the number.

Size and height. Elevated decks need more framing, posts and railing.
Decking material: pressure-treated lumber, cedar or composite.
Railing style and stairs, which are labor heavy.
Site conditions such as slope, access for equipment and soil.
Whether it attaches to the house or stands free, plus covered porch or roof additions.
Permit and inspection costs.

See typical deck & porch building price ranges →

From a deck & porch building customer

“Dan was knowledgeable, offered solutions to my concerns, extremely affordable and had the patience of Job.”

T Simmons
Renovation
November 2025

All 44 reviews →

Want a real number for your Kennesaw deck & porch building job?

The only way to price it honestly is to see it. We come out, walk the job and put it in writing — free, and with no obligation to book.

Call and we answer 24/7. Forms sent during the day get a call back the same day.

Call (470) 419-0922 Get a free estimate

Deck & Porch Building in Kennesaw — questions we get asked

How long does it take to build a deck?: Many take one to three weeks of working time, with permit review and weather adding to the calendar. Larger or covered structures take longer.
Do I need a permit?: Usually, especially for attached or elevated decks. We handle the paperwork where we can and tell you what to expect.
Wood or composite?: Pressure-treated is lower cost upfront but needs regular staining. Composite costs more and needs less upkeep. We lay out the tradeoffs for your situation.
When can I stain a new pressure-treated deck?: Usually after it has dried out, which can take several weeks to a few months depending on weather. Staining too soon traps moisture.
Will the work tear up my yard?: Some. Digging and material delivery leave marks. We protect what we can and leave the area tidy.

Planning deck & porch building? Start here

What makes a deck last: the parts you can't see The footings, the ledger and the framing connections decide a deck's life; the boards you walk on are the cheapest part to replace.

Everything about deck & porch building →

More in Kennesaw

Cobb County housing, neighborhoods and what we do there.

Painting & remodeling in Kennesaw →

Other work in Kennesaw

Deck & Porch Building nearby

Prefer to talk it through? Dan picks up.