Bathroom Remodel Cost in Atlanta (2026)
Reviewed 2026-10-08 · metro Atlanta
Most bathroom remodels in metro Atlanta cost between $8,000 and $35,000. A small hall bath refresh sits at the low end, and a gutted primary bath with a custom shower and moved plumbing can pass $50,000. These are typical metro Atlanta market ranges, not a quote from WS Painting & Remodeling. Your price depends on your house, your selections, and what is behind the walls.
Ranges are a starting point. See how we handle bathroom remodeling, or get a free written estimate for your actual job.
What it typically costs
budget
$8,000–$15,000
Hall or guest bath, about 40 to 50 sq ft. New vanity, toilet, fixtures, lighting, and floor tile or vinyl plank. Tub or shower kept and refinished or re-caulked, with fresh paint.
mid
$18,000–$35,000
Full gut of a standard bath. New tub or shower with tile surround, new vanity and top, new flooring, new fixtures and lighting, exhaust fan, and waterproofing done to current practice.
high
$40,000–$70,000
Primary bath, 80 sq ft or more. Custom frameless glass shower, freestanding tub or large format tile, double vanity, heated floor, relocated plumbing, and upgraded electrical.
Ranges were set from a 2026 review of Atlanta-area pages from several aggregators (ContractorPlus, CostFlow, Angi, LatestCost). They report averages between roughly $15,000 and $37,000 with a spread of $2,000 to $40,000 by scope. These tiers are conservative working ranges, not a single-source average. Verify against current quotes.
What moves the number
- Shower and tub work. Tile showers need a proper waterproof system, and that labor is where much of the cost sits. A prefab acrylic surround costs far less than custom tile.
- Moving the toilet, shower, or tub. Each move means cutting the floor, and over a slab, breaking concrete. Keeping fixtures in place is the biggest lever you have.
- Hidden water damage. Bathrooms built before the 2000s often hide rot around tubs and under toilets. It is common to find some once demo starts, so a contingency of 10 to 15 percent is reasonable.
- Tile selection and layout. Large format tile and herringbone patterns cost more to set than plain subway or 12 by 24 tile, since they take more time and more waste.
- Glass. A frameless custom glass enclosure is often $1,500 to $4,000 on its own.
- Ventilation. Atlanta humidity is hard on bathrooms. A real exhaust fan vented outside, and not into the attic, is cheap compared with repairing mold later.
- Permits. Plumbing or electrical changes generally require one, and requirements differ between Cobb, Douglas, Paulding, and Fulton.
How to spend less
- Keep every fixture where it is. This one decision can save $3,000 to $8,000.
- If your tub is in good shape, refinishing it costs a few hundred dollars compared with several thousand to replace it. We would rather tell you that than sell you a new tub.
- Use standard tile sizes and put the expensive tile on one accent wall or a niche, not the whole room.
- Buy the vanity, faucet, and light fixtures yourself from a retailer, and check the contractor markup on supplied items.
- Pick a prefab tub or shower surround if you will not be selling for years. Good ones look fine, and they remove the biggest labor item.
- Do not skip the waterproofing to save money. This is the one place where cheaper costs you more later.
- Schedule in winter. Some tile and fixture suppliers discount in slow months, and contractors often have open calendars.
Questions we get asked
- How long does a bathroom remodel take?
- A cosmetic update takes about a week. A full gut typically takes three to six weeks, with waterproofing and tile cure times setting the pace. Custom glass is cut after the shower is finished, which adds one to two weeks at the end.
- How much does it cost to convert a tub to a walk-in shower?
- In metro Atlanta, expect about $6,000 to $15,000 depending on tile, glass, and whether the drain location changes. A prefab shower base with a wall kit is at the low end.
- Do I need a permit?
- Swapping a vanity, toilet, or paint does not usually need one. Moving plumbing, adding circuits, or changing the structure usually does. Check with your county or city building department.
- Why do two bathroom quotes differ by so much?
- Usually scope. Check whether each quote includes demo, waterproofing, permit fees, a vent fan, glass, and disposal, and whether tile and fixtures are listed as allowances or as actual selections.
- Can I use my bathroom during the remodel?
- Not that one. If it is your only bathroom, plan for a few weeks of alternatives, and ask your contractor to sequence the work to shorten the time without water.
Before you budget, read these
- What happens during a bathroom remodel, step by step Why a bathroom is built from the water out, how curing and glass set the schedule, and how long the room is out of use.
- Is your bathroom worth remodeling, or just worth refreshing? How to tell a failing bathroom from a dated one, what is genuinely worn out in a 90s bath, and what is worth keeping.
- Why bathroom remodels fail: substrate, venting, and demo surprises Why most failed bathrooms were tiled over the wrong surface or vented wrong, and what turns up when an older bath is opened.
Prefer to talk it through? Dan picks up.
(470) 419-0922