Deck & Porch Building in Smyrna, GA
Smyrna is about 25 minutes east of the shop, and its older core is the same mid-century ranch stock the crews already work across the west-metro towns — 1950s and 60s houses on lots that are now worth more than the house standing on them. That sets up the conversation this market actually has: gut and add onto the ranch, or take it down and rebuild. Either road is a remodel rather than a repaint, which is why the work here runs to kitchens, baths and basement build-outs.
Cobb County · about 24 minutes from our Powder Springs shop
Deck & Porch Building for Smyrna homes
The defining stock is mid-century ranch — brick and frame houses from the 1950s and 60s in areas like Cheney Woods, Bennett Woods and Belmont Hills, many on larger lots close to downtown. Open one of these up and the era shows: plaster or early drywall over plank sheathing, cloth-wrapped wiring on undersized panels, galvanized or first-run copper supply lines, and original crawlspace framing that often needs sill-plate and subfloor repair before a new kitchen or bath goes in. Because the lot carries the value, owners here tend to commit to a full gut-and-reconfigure — opening the compartmentalized ranch plan, adding a primary suite or finishing the basement, and pulling aging wood and hardboard siding — rather than patch and move on. West of downtown the newer stock in Vinings Estates shifts the work toward second-generation kitchen, bath and deck updates on 1990s-2000s homes.
Areas we work in Smyrna
- Williams Park
- Cheney Woods
- Bennett Woods
- Belmont Hills
- Smyrna Heights
- Vinings Estates
Near Smyrna Market Village, The Village Green, Taylor-Brawner Park and across the rest of Smyrna.
What the job actually involves
A deck is a structure first and a finish second. Footings, ledger attachment and framing decide whether it is safe in twenty years, and Georgia clay, rain and termites make those details matter.
We use ground-contact pressure-treated lumber for structure, hot-dipped galvanized or stainless fasteners and connectors, and flashing at the house, because rot and rust at the connections are what end most decks early.
How we run a deck & porch building job in Smyrna
- 1
Design, permits and layout
We agree on size, height, stairs and railing, then pull a permit where required. Footing locations are laid out and utilities are located before digging.
- 2
Set footings and posts
Holes are dug to the required depth and diameter for the local soil and frost depth, and concrete footings are poured. Georgia clay holds water, so drainage and footing size matter. Posts are set on proper connectors, not buried in dirt.
- 3
Attach the ledger and frame
If the deck attaches to the house, the ledger is flashed and bolted through the rim joist, not nailed. Beams and joists are framed with metal hangers and the right fasteners, with proper spacing.
- 4
Inspect framing
Where the jurisdiction requires it, an inspector looks at footings and framing before decking covers them.
- 5
Decking, stairs and railing
Decking goes down with correct gaps for drainage and expansion. Stairs are built with consistent risers, and railings are fastened to meet code height and strength.
- 6
Finish and cleanup
Pressure-treated wood needs time to dry before staining, which can be weeks, so we advise you on timing. Composite needs no stain. We clean the site and haul away scraps.
What moves the price
We will not quote Smyrna blind over the phone — these are the things we look at on site that decide the number.
- Size and height. Elevated decks need more framing, posts and railing.
- Decking material: pressure-treated lumber, cedar or composite.
- Railing style and stairs, which are labor heavy.
- Site conditions such as slope, access for equipment and soil.
- Whether it attaches to the house or stands free, plus covered porch or roof additions.
- Permit and inspection costs.
From a deck & porch building customer
“We’ve been working with WS Painting and Remodeling after two leaks in our home, and they’ve been fantastic. … The quality of their work has been outstanding and made a stressful situation much easier.”
Leak repairs
Want a real number for your Smyrna deck & porch building job?
The only way to price it honestly is to see it. We come out, walk the job and put it in writing — free, and with no obligation to book.
Call and we answer 24/7. Forms sent during the day get a call back the same day.
Deck & Porch Building in Smyrna — questions we get asked
- How long does it take to build a deck?
- Many take one to three weeks of working time, with permit review and weather adding to the calendar. Larger or covered structures take longer.
- Do I need a permit?
- Usually, especially for attached or elevated decks. We handle the paperwork where we can and tell you what to expect.
- Wood or composite?
- Pressure-treated is lower cost upfront but needs regular staining. Composite costs more and needs less upkeep. We lay out the tradeoffs for your situation.
- When can I stain a new pressure-treated deck?
- Usually after it has dried out, which can take several weeks to a few months depending on weather. Staining too soon traps moisture.
- Will the work tear up my yard?
- Some. Digging and material delivery leave marks. We protect what we can and leave the area tidy.
More in Smyrna
Cobb County housing, neighborhoods and what we do there.
Painting & remodeling in Smyrna →Other work in Smyrna
Prefer to talk it through? Dan picks up.
(470) 419-0922