Deck & Fence Staining in Dallas, GA
Dallas is the Paulding County seat, about twenty minutes from the shop, and its housing splits in two: an old core around the courthouse square and a wall of post-2000 subdivisions from the years Paulding was one of the fastest-growing counties in the country. That newer stock is the bulk of the work now, and it is the same builder-grade construction the crew already paints in Hiram and Powder Springs — just reaching its first repaint and first remodel a few years behind them.
Paulding County · about 20 minutes from our Powder Springs shop
Deck & Fence Staining for Dallas homes
Three layers. Around the courthouse square sit genuinely old wood-frame houses from the late 1800s through the 1920s — weatherboard siding, wood sash and deep trim that need carpentry and real prep, often over lead-era coatings, before any topcoat. Scattered between are 1960s-through-80s brick ranches and split-levels on larger lots. The bulk, though, is post-2000 neo-traditional subdivisions, and because the county grew so fast they are aging as one wave: builder-grade hardboard and Masonite lap siding, some early fiber-cement among it, is reaching the age where Georgia humidity ends it, the pressure-treated pine decks are spent, and the first kitchens and baths are due their remodel.
Areas we work in Dallas
- Downtown Dallas
- Brookside
- Seven Hills
- Allens Creek
- Riverwood
Near Paulding County Courthouse, Dallas Theater, Sara Babb Park and across the rest of Dallas.
What the job actually involves
In Georgia, a wood deck or fence takes sun, rain, pollen and mildew all year. Stain only lasts if the wood is clean, dry and open enough to absorb it.
We use a penetrating exterior wood stain with UV and mildew resistance, plus a wood cleaner and brightener beforehand, because a stain applied over dirty or damp wood fails early.
How we run a deck & fence staining job in Dallas
- 1
Inspect and repair
We check for loose boards, popped nails, rotted rails, wobbly posts and splintered edges. Screws replace failing nails. Bad boards are flagged for replacement because stain will not fix structural problems.
- 2
Clean and strip
Mildew, dirt and the old failing finish are removed with a wood cleaner or stripper and a controlled wash. Too much pressure fuzzes the wood and gouges soft boards, so we keep it moderate and follow the grain.
- 3
Brighten and let it dry
A wood brightener evens out the color and restores pH after stripping. The wood then has to dry before staining. That is often a couple of days, longer after rain or in humid stretches. Staining damp wood traps moisture and causes peeling.
- 4
Sand rough spots
Handrails, steps and splintery boards are sanded smooth. Fresh sanding opens the grain so stain soaks in evenly.
- 5
Apply stain
Stain goes on with a sprayer, brush or pad, worked into the grain and back-brushed so it does not pool. Boards are done full length to avoid lap marks, usually one coat of penetrating stain or two thin ones depending on the product.
- 6
Cure and cleanup
We keep traffic off until it is dry to the touch, typically a day, and longer for full cure. Overspray on siding, concrete and plants is cleaned or masked ahead of time.
What moves the price
We will not quote Dallas blind over the phone — these are the things we look at on site that decide the number.
- Total square footage of deck surface and rails, or linear feet and height of fence.
- Existing finish. Old solid stain or paint takes more stripping than a bare or lightly weathered surface.
- Condition of the wood, including how much sanding and board replacement is needed.
- Stain type: clear sealer, semi-transparent, or solid color.
- Ground-level versus elevated work, and details like spindles that take more brushwork than flat boards.
- Whether both sides of a fence are done.
From a deck & fence staining customer
“Hands down the best contractor experience we’ve ever had! … They painted the exterior of our house and handled several repairs with incredible attention to detail. … Dan provided a detailed quote up-front that gave us full peace of mind.”
Exterior repaint and repairs
Want a real number for your Dallas deck & fence staining job?
The only way to price it honestly is to see it. We come out, walk the job and put it in writing — free, and with no obligation to book.
Call and we answer 24/7. Forms sent during the day get a call back the same day.
Deck & Fence Staining in Dallas — questions we get asked
- How often does a deck or fence need restaining in Georgia?
- It varies with the product and sun exposure. Horizontal surfaces like deck floors wear fastest. If water no longer beads on the wood, it is time to restain.
- How long is the deck off limits?
- Plan on a few days around the work, mostly drying time. Foot traffic can usually return in a day after staining, with furniture waiting a bit longer.
- Can you stain over old stain?
- Sometimes. If the old finish is intact and the new stain is compatible, yes. If it is peeling, it has to come off first.
- What if it rains?
- We postpone. Stain needs dry wood and dry weather for several hours afterward. Summer storms in the afternoon often shape our schedule.
- Do I need to move my plants and grill?
- Yes, please clear furniture and move potted plants. We cover nearby shrubs and the house siding.
More in Dallas
Paulding County housing, neighborhoods and what we do there.
Painting & remodeling in Dallas →Other work in Dallas
Prefer to talk it through? Dan picks up.
(470) 419-0922